Battery State of Charge and Battery State of Health

공유하기

You know your battery’s State of Charge (SoC) and State of Health (SoH). These help you keep your battery working well and lasting longer. This article will explain SoC and SoH, their relationship, and best practices for maintaining them. This will help you get the most out of your batteries.

Part 1. Understanding battery state of charge (SoC)

Battery State of Charge (SoC)

The Battery State of Charge (SoC) is the ratio of the current charge in the battery to its maximum possible charge. It is like a fuel gauge for batteries. SoC indicates how much charge remains in the battery and is usually displayed as a percentage. For example, 100% means the battery holds a full charge, and 0% is empty. SoC can also be shown using voltage levels; a higher voltage indicates a higher SoC.

battery state of charge soc

Methods of Measuring SoC

1. Coulomb Counting

Coulomb counting is a common way to measure SoC. This method counts the electric charge in and out of the battery. It works by measuring the current flow and keeping track of the time. This gives an accurate measure of the charge used and the charge left.

장점:

  • It is accurate when the initial SoC is known.
  • Useful for tracking change over time.

Limitations:

  • Errors can build up over time if not corrected.
  • An accurate initial SoC is needed to be effective.
  • Sensitive to measurement errors and noise.

2. Voltage Method

The voltage method measures the battery’s voltage to estimate the SoC. Different voltage levels correspond to different SoC values. This method is simple and easy to use.

Factors affecting accuracy:

  • Battery type: Different batteries have different voltage characteristics.
  • Temperature: Temperature changes can affect voltage readings.
  • Load: The current load on the battery can change the voltage.

장점:

  • Simple and quick.
  • No need for complex equipment.

Limitations:

  • It is less accurate than other methods.
  • It is affected by many external factors like temperature and load.

3. Impedance Spectroscopy

Impedance spectroscopy measures the battery’s internal resistance to estimate SoC. This method sends a small alternating current (AC) through the battery and measures the voltage response. It helps to understand the battery’s internal properties.

Benefits:

  • Provides detailed information about the battery’s condition.
  • It can be very accurate when done correctly.

Drawbacks:

  • Requires specialized equipment.
  • More complex and time-consuming.
  • It is not commonly used for everyday applications due to its complexity.

Importance of SoC Monitoring

Role of SoC in Preventing Overcharging and Deep Discharging

  • Monitoring SoC helps avoid overcharging, which can damage the battery.
  • It also prevents deep discharging, which can shorten the battery life.
  • Keeping SoC in the correct range makes the battery last longer.

Impact on Battery Performance and Lifespan

  • Correct SoC ensures the battery works well.
  • It makes the battery reliable.
  • It helps the battery to perform at its best.

Applications Where Accurate SoC Monitoring is Critical

  • Electric Vehicles: They need precise SoC to avoid running out of power.
  • Renewable Energy Storage: Accurate SoC helps use solar and wind energy efficiently.
  • Portable Devices: Phones and laptops need good SoC to keep running throughout the day.

Part 2. Understanding battery state of health (SoH)

Battery State of Health

Battery State of Health (SoH) tells how good a battery is. It shows how much life the battery has left. SoH compares the battery’s current condition to when it was new. If a battery has 80% SoH, it can only hold 80% of the charge it could when it was new. This helps you know if the battery needs replacing soon. 

battery state of health soh

Methods of Assessing SOH

1. Capacity Testing

Process of Capacity Testing:

  • Fully charge the battery.
  • Discharge it while measuring how much energy it gives out.
  • Compare this to the battery’s original capacity.

Interpretation of Capacity Test Results:

  • If a battery gives out much less energy than it used to, its SoH could be better.
  • For example, if a 1000mAh battery only gives 800mAh, it has 80% of its original capacity.

2. Internal Resistance Measurement

How Internal Resistance Reflects the Health of the Battery:

  • Low resistance means the battery can deliver power efficiently.
  • High resistance means the battery struggles to deliver power.
  • As batteries age, their internal resistance goes up.

Techniques for Measuring Internal Resistance:

  • Use a specialized meter to measure voltage and current.
  • Calculate resistance using Ohm’s Law (Resistance = Voltage / Current).
  • Compare the result to the battery’s specs.

3. Self-discharge Rate

Explanation of Self-discharge Rate as an SOH Indicator:

  • Self-discharge is how fast a battery loses charge when not in use.
  • A high self-discharge rate means the battery is not healthy.
  • Healthy batteries keep their charge for a long time.

Methods to Measure and Interpret Self-discharge Rates:

  • Fully charge the battery and let it sit for a week.
  • Measure how much charge is left.
  • If the battery loses a lot of charge quickly, its SoH is poor.

Factors Affecting SoH

Age of the Battery

  • Batteries degrade over time, even without use.
  • Older batteries hold less charge and perform worse.

Number of Charge-Discharge Cycles

  • Each charge and discharge cycle wears the battery down.
  • More cycles lead to a shorter battery lifespan.

Operating Temperature and Environmental Conditions

  • Extreme heat or cold can damage batteries.
  • Stable, moderate temperatures are best for battery health.

Storage Conditions and Maintenance Practices

  • Proper storage and regular maintenance extend battery life.
  • Keep batteries clean, dry, and at optimal charge levels.

Part 3. Relationship between SoC and SoH

relationship between soc and soh

How SoC Influences SoH

Impact of Overcharging and Deep Discharging:

  • Overcharging a battery makes it too hot and damages it over time. Deep discharging stresses the battery, making it wear out faster.

Optimal SoC Range and Battery Life:

  • Keeping the battery charged between 20% and 80% helps it last longer. It reduces strain on the battery and keeps it working well for a longer time.

How SoH Affects SoC Accuracy

Battery Aging and SoC Accuracy:

  • As batteries get older, they can’t hold as much charge. This affects how accurately we can tell how much charge is left (SoC). Older batteries might show wrong readings or lose charge quickly.

Adjusting SoC Estimates for Aging Batteries:

  • Innovative systems adjust how they measure SoC as batteries age. They use battery resistance and past use to give better readings, even as the battery ages.

Part 4. Best practices for maintaining SoC and SoH

Regular Monitoring

Regularly check your battery’s SoC and SoH. Use tools like battery management systems (BMS) to get accurate readings. This helps you keep track of the battery’s condition and make necessary adjustments.

Optimal Charging Practices

Avoid overcharging your battery. Once it reaches 80% charge, try to stop charging. Similarly, don’t let the battery go below 20%. These practices prevent stress on the battery and extend its life.

Temperature Management

Keep your battery at a stable temperature. Avoid exposing it to extreme heat or cold. If possible, use temperature control systems. This helps maintain both SoC and SoH.

Proper Storage

Store your battery in a cool, dry place. If you don’t use it for a while, keep it at about 50% charge. This prevents degradation and keeps the battery healthy.

Regular Maintenance

Perform regular maintenance on your battery. Clean the terminals and check for any signs of wear or damage. Replace the battery if it shows a significant decline in SoH. Regular maintenance ensures the battery remains in good condition and performs well.

5부. 자주 묻는 질문

  • How can I improve the battery life of my smartphone?

    To extend smartphone battery life, avoid frequent total discharges and charges. Instead, aim to keep the battery level between 20% and 80%. Also, avoid exposing your phone to extreme temperatures and consider using battery-saving modes when possible.
  • Is it better to charge my laptop battery 100% or keep it between 20% and 80%?

    It’s better to keep laptop battery longevity between 20% and 80% charge whenever possible. Frequently charging to 100% can reduce battery life over time due to increased stress on the cells.
  • What are the signs that my battery needs to be replaced?

    You may need a battery replacement if you notice significantly reduced battery life compared to when it was new. Frequent unexpected shutdowns, even when the battery indicator shows charge, are another sign. Also, look for noticeable swelling or overheating during use.
  • How can I store batteries properly when not in use?

    It’s best to keep batteries at around 50% charge in a cool, dry place when storing batteries. Avoid storing batteries fully charged or discharged for long periods, as this can lead to faster degradation. Regularly check stored batteries and recharge as needed to maintain health.
  • What impact does fast charging have on battery health?

    Fast charging can cause batteries to heat up more than regular charging, accelerating battery degradation over time. While convenient, high-speed charging may lead to a shorter battery lifespan. Balancing fast charging with standard charging is recommended for optimal battery health.
avatar

Henry

배터리 산업 콘텐츠 작성자

더보기

recommend_pic

Top 10 Portable Lithium Battery Packs For Camping In 2024

Are you looking for the ideal portable lithium battery pack for camping? Well, we have hand-picked the top 10 different brands suiting different requirements. 

2024년도 소형 12V 배터리의 베스트10

Time to power your electronic device with a small 12 volt battery. Understand the specifications and details of the best 10 small batteries for the right choice.

판매 중인 리튬 인산 배터리에 대한 최상의 혜택을 찾습니다.

Although many LiFePO4 batteries are for sale, finding the ideal one takes time and effort. We have picked the top 10 brands based on your requirements.

Best 10 Fish Finder Battery Models 2024

Buy the best fish finder battery in 2024. Understand each battery's key aspects, including capacity, voltage, lifespan, warranty, and price.

Top 10 Tracker Lithium Battery Guide and Review

Are you looking for the ideal tracker lithium battery for your device? Explore our comprehensive guide to find the perfect match!

맞춤형 리튬 이온 배터리 제조업체

cales